TFA 60.1514 Mode D'emploi page 9

TFA_No. 60.1514_Anleitung
Radio-controlled alarm clock
7. Operation
7.1 Setting of the alarm time
• Set the desired alarm time by turning the dial.
• To activate the alarm function, press the ALARM/ON/OFF switch.
• A red bar appears.
• When the adjusted alarm time is reached, the alarm will ring.
• If the alarm is not stopped manually, the increasing alarm will automati-
cally turn off after certain minutes and will be reactivated twelve hours
later.
• Once the alarm starts to ring, you can activate the snooze function by
pressing the SNOOZE button.
• The alarm will be interrupted for 5 minutes.
• The snooze function can be activated up to six times.
• Press the ALARM/ON/OFF switch once again to deactivate the alarm.
• The red bar disappears.
7.2 Backlight
• Press the SNOOZE button and the light turns on for 5 seconds.
8. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or scouring
agents.
• Remove the battery if you do not use the device for a long period of time.
• Keep the device in a dry place.
16
20.01.2016 16:54 Uhr Seite 9
Radio-controlled alarm clock
8.1 Battery replacement
• Change the battery when the functions of the device become weak.
• Open the battery compartment and insert one new battery 1.5 V AA,
polarity as illustrated.
• Close the battery compartment again.
9. Troubleshooting
Problems Solutions
➜ Ensure that the battery polarity is
No hand movement
correct
➜ Change the battery
➜ Wait for attempted reception during the
No DCF reception
night
➜ Choose another place for your product
➜ Check if there is any source of inter-
ference
➜ Restart the device according to the
manual
➜ Change the battery
Incorrect indication
If your device fails to work despite these measures contact the supplier from
whom you purchased it.
17