Napoleon DLKAX42 Guide Rapide page 2

NOTE: Holes
located under log
(not illustrated)
A2
A1
1. Place the holes in log #1 on A1 and A2. Ensure
PLACE TEXT BOX HERE.
the notch fi ts around the middle burner tube.
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
NOTE: Holes located
under log (not illustrated)
Air Gap
1
1
3. Place log #3 at the back of the burner,
PLACE TEXT BOX HERE.
ensuring the notch fi ts around the pilot shield
NOTE: ENSURE NOMENCLATURE IS
and is pulled forward tight behind the pilot
CONSISTENT THROUGHOUT.
shield. Do not cover air gap behind burner.
* NOTE: Place glowing embers to the front of the large clusters of ports. The burner has been designed
to have large fl ames in these locations. If not, blue fl ames will be present.
Bumpout
Notch
4
1
4. Place the bumpout on log #4 into the notch in
PLACE TEXT BOX HERE.
log #1, resting the opposite end beside
NOTE: ENSURE NOMENCLATURE IS
the fi rst grate post.
CONSISTENT THROUGHOUT.
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada
Notch
Middle
Burner Tube
1
Notch
3
C1
C2
2
3
2
1
2. Place the holes in log #2 on B1 and B2.
PLACE TEXT BOX HERE.
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
Ember Locations
3
1
3a. Apply glowing embers to any visible spaces
PLACE TEXT BOX HERE.
on the burner tube (not illustrated). *
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
NOTE: Notch
located under log
(not illustrated)
5
3
1
4
5. Place the notch under log #5 onto the
PLACE TEXT BOX HERE.
bumpout on log #3, resting the opposite end
NOTE: ENSURE NOMENCLATURE IS
on the second grate post.
CONSISTENT THROUGHOUT.
• 1(866)820-8686
NOTE: Holes
located under log
(not illustrated)
2
B2
B1
2
Bumpout
2
W415-2006 / B / 04.03.20
• www.napoleon.com