Software Update; Updating Procedure - Samsung HW-M4500 Manuel D'utilisation

10 SOFTWARE
UPDATE
Samsung may offer updates for the Soundbar's
system firmware in the future.
If an update is offered, you can update the
firmware by connecting a USB device with the
firmware update stored on it to the USB port on
your Soundbar.
For more information about how to download
update files, go to the Samsung Electronics
website at (www.samsung.com  Support).
Then, enter or select the model of your Soundbar,
select Software & Apps, and then Downloads.
The option name can vary.
USB port
DC 19V
HDMI IN
5V 0.5A
AUX IN
HDMI OUT
OPTICAL IN (TV-ARC)
5V 0.5A

Updating Procedure

1. Follow the steps below to download the
product software:
Go to the Samsung website at
(samsung.com)
- select the customer support option (the
option name is subject to change)
2. Save the downloaded software to a USB
stick and select "Extract Here" to unzip the
folder.
3. Turn off the Soundbar and connect the USB
stick containing the software update to the
USB port.
4. Disconnect the power cord, reconnect it, and
then turn on the Soundbar.
5. Turn on the Soundbar. Within 3 minutes,
"UPDATE" is displayed and updating begins.
6. When the update finishes, the Soundbar
turns off. Press the
control for 5 seconds. "INIT" appears on the
display and then the Soundbar turns off.
The update is complete.
• This product has a DUAL BOOT function.
If the firmware fails to update, you can
update the firmware again.
ENG - 28
search for the model name

button on the remote
p