GE TPG21BRDABB Mode D'emploi page 5

FROZEN FOOD STORAGE COMPARTMENT SHELVES
Some models have an ice-tray shelf and some have a full-width step shelf.
Ice Tray Shelf
To remove the ice tray shelf: Lift the left side of the shelf off its
supports, then pull the shelf to the left to free it of the plug supports.
Pull the shelf to the right to free the pins from the holes in the
cabinet wall.
Step Shelf
To remove the step shelf:
1
2
1. Lift left side of shelf slightly.
2. Move shelf to the left to free its right ends
from holes in the cabinet wall.
3. Lower right side of shelf, move shelf to the
right and take it out.
Ice Trays
(on some models)
Ice trays are designed to release
ice cubes easily. Hold tray upside-
down over a container and twist
both ends to release cubes.
(on some models)
To replace the step shelf:
1. With shelf tilted as shown, fit left ends of
shelf into holes in cabinet wall.
For only one or two ice cubes,
leave the tray right-side up, twist
both ends slightly and remove
desired number of cubes. Wash ice
trays and storage bin in lukewarm
water only. Do not put them in an
automatic dishwasher.
Plug supports
2. Lift left side of shelf slightly, swing shelf
up, fit right ends of shelf into holes in
cabinet wall, and lower shelf into place.
5