Fitting A Different Plug; Great Britain And Ireland; Mains Lead Replacement - GE TPG21BRDABB Mode D'emploi

Electrical Requirements
We recommend that this appliance be connected to the mains supply via a suitable switched
socket in a readily accessible position. All appliances come complete with a fitted plug. The
plug on your refrigerator has a 13A fuse. If the plug does not fit your sockets, a new plug can
be fitted. Cut off the old plug and throw it away. Do not insert it into a socket elsewhere in
the house as this could cause a shock.
WARNING: THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: Fitting a Different Plug
The wires in the mains lead are coloured in accordance with the
following code: Green and Yellow-Earth; Blue-Neutral; Brown-Live.
If you fit your own plug the colours of these wires may not correspond
with the identifying marks on the plug terminals. This is what you
have to do:
1. Connect the green and yellow
(earth) wire to the terminal
in the plug marked 'E' with
the symbol or coloured green
or green and yellow.
2. Connect the blue (Neutral) wire
to the terminal in the plug
marked 'N' or coloured black.
3. Connect the brown (Live) wire to
the terminal marked 'L' or
coloured red.

Mains Lead Replacement

If the mains lead on this appliance needs replacing at any time, it must be replaced by a
special lead which is obtainable from your nearest service centre. A charge will be made for
the replacement of the mains lead if you have damaged it.
12
INSTALLATION INSTRUCTIONS
FOR GREAT BRITAIN AND IRELAND ONLY
Green
Yellow
E
L
N
Brown
Blue
Cord grip
With alternative plug, a 15A fuse must be fitted either in the plug or
adapter or in the main fuse box. In the event of replacing a fuse in the
plug supplied, a 13A ASTA-approved fuse to BS1362 must be fitted.
If the plug is the moulded-on type, the fuse cover must be refitted
when changing the fuse. In the event of losing the fuse cover, the plug
must not be used until a replacement fuse cover has been obtained and
fitted. A new fuse cover can be obtained from your nearest service
centre or local electricity board. The colour of the correct replacement
fuse cover is that of the coloured marks or insert in the base of the
plug.