Oreck AIR RESPONSE Manuel D'utilisation page 9

CAUTION! TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE CLEANING AND SERVICING. IMPORTANT! THE FILTERS ARE NOT WASHABLE.
Replacing the Odor Filter
1
Remove cover
Odor and HEPA Media filters may not need to be replaced at the same time.
Replace according to indicator light.
Replacing the HEPA Media Filter
1
Remove cover
2 3
Remove & replace with
new Odor filter
Remove & replace with
2 3
new HEPA Media filter
After filter is replaced,
press indicator light for
4 seconds to reset.
Replace cover
Icon will disappear.
Remove any plastic coverings
from new filter(s) before installing.
After filter is replaced,
press indicator light for
4 seconds to reset.
Replace cover Icon will disappear.
Dust Sensor is located
on the right side of the unit.
4
Clean dust sensor every time a
filter is replaced by gently wiping
clean with a cotton swab. This will
help ensure the air purifier
continues to operate at maximum
performance.
8