marklin E19 Mode D'emploi page 7

Safety Warnings
• This locomotive is to be used only with an operating system
designed for it (Märklin AC transformer, Märklin Delta,
Märklin Digital or Märklin Systems).
Use only transformers rated for your local household
!
power. Do not under any circumstances use transformers
rated for 220 volts or 110 volts.
• This locomotive must never be supplied with power from more
than one transformer.
• Pay close attention to the safety warnings in the
instructions for your operating system.
• The feeder track must be equipped to prevent interference
with radio and television reception, when the locomotive is
to be run in conventional operation. The 74046 interference
suppression set is to be used for this purpose.
No warranty or damage claims shall be accepted in those cases where
parts neither manufactured nor approved by Märklin have been installed
in Märklin products or where Märklin products have been converted in
such a way that the non-Märklin parts or the conversion were causal to the
defects and / or damage arising. The burden of presenting evidence and
the burden of proof thereof, that the installation of non-Märklin parts or the
conversion in or of Märklin products was not causal to the defects and / or
damage arising, is borne by the person and / or company responsible for
the installation and / or conversion, or by the customer.
Function
• Possible operating systems: Märklin Transformer AC,
Märklin Delta, Märklin Digital, Märklin Systems.
• Recognition of the mode of operation: automatic.
• Compact design Sine propulsion with a maintenance-free
motor.
• Addresses that can be set (Control Unit): 01 – 80
Address set at the factory: 19
• Mfx technology for the Mobile Station / Central Station.
Name set at the factory: BR E 19 11
• Adjustable acceleration (ABV).
• Adjustable Braking delay (ABV).
• Adjustable maximum speed.
• Setting the locomotive parameters electronically with the
Control Unit, Mobile Station or Central Station.
• Only the train control functions and headlight changeover
feature are available in analog operation.
The maintenance work necessary with normal operation of
this locomotive is described below. Please see your authorized
Märklin dealer for repairs or spare parts.
7