Pfaff HX 150 Mode D'emploi page 9

Scissors-lift trolleys
English
Operating Instructions
RAISING
The scissors lift truck is
equipped with a hydraulic
pump.
Use the foot pedal to
raise the load.
Handling:
Check the following before you start work:

The operator controls work properly

The roller brake works properly

The rollers and roller axles are in good condition

Check for leaks
Picking up the load
Make sure the load does not exceed the carrying capacity of the scissors lift truck
The load must be evenly distributed
across the platform
Moving with a load
Do not use the scissors lift truck on a sloping surface.
When you transport the load, raise it as little as possible off the ground (max. 100 mm), but watch the
clearance below the load.
Watch out for obstacles in the path of the truck!
When you stop the truck, be sure to apply the roller brake.
Be sure that the load is lowered before you move the truck.
Roller Brake
A brake is mounted on the steering rollers of the scissors lift truck.
Be sure that the brake is applied and locked when you stop the lift truck.
technische Änderungen vorbehalten
For lowering the platform
lift up the lowering lever.
Pressing the lever further
increases the lowering
speed.
design changes under reserve
F 06.08.131
LOWERING
loosening
locking
changements techniques sous réserve
9 / 16