Master Spas INT MP Impact Manuel De L'utilisateur page 60

Spa Controls
INFORMATION
SYSTEM INFORMATION
The System Information Menu displays various settings and identification of the particular system.
As each item in the menu is highlighted, the detail for that item is displayed at the bottom of the
screen. These settings are for information only and cannot be changed.
System Information
Software ID (SSID)
Back
System Model
Current Setup
Configuration Signature
Heater Voltage
Heater Type
Software ID (SSID):
M100_101 V0.6
Software ID (SSID)
Displays the software ID number for the System.
System Model
Displays the Model Number of the System.
Current Setup
Displays the currently selected Configuration Setup Number.
Configuration Signature
Displays the checksum for the system configuration file.
Heater Voltage (Feature not used on CE rated systems.)
Displays the operating voltage configured for the heater.
Heater Wattage as Configured in Software (CE Systems Only.)
Displays a heater kilowatt rating as programmed into the control system software (1-3 or 3-6).
Heater Type
Displays a heater type ID number.
Dip Switch Settings
Displays a number that represents the DIP switch positions of S1 on the main circuit board.
Panel Version
Displays a number of the software in the topside control panel.
DO NOT DIVE. 58