Master Spas INT MP Impact Manuel De L'utilisateur page 52

Spa Controls
THE SETTINGS SCREEN
HEAT MODE – READY VS. REST
In order for the spa to heat, a pump needs to circulate water through the heater.
REST Mode will only allow heating during programmed filter cycles.
Ready Mode will allow heating any time the water temperature drops below the set temperature.
READY-IN-REST MODE
READY/REST appears in the display if the spa is in Rest Mode and the Jets 1 Button is touched. It is
assumed that the spa is being used and will heat to set temperature. After 1 hour, the System will
revert to Rest Mode. This mode can also be reset by entering the Settings Menu and changing the
Heat Mode.
DO NOT DIVE.
Settings
Temp Range
Back
Heat Mode
Time of Day
Filter Cycles
Light Cycle
Invert Panel
Lock
50
High
Ready
Normal