Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ELECTRIC DRYER ELECTRICAL CONNECTIONS
Connection Options
Power Cord
4-wire receptacle (NEMA Type 14-30R)
3-wire receptacle (NEMA Type 10-30R
Connecting 4-Wire Connection: Power Supply Cord
IMPORTANT: A 4-wire connection is required where local
codes do not permit the use of 3-wire connections.
Standard Power Supply Cord Connectors
Flanged spade connector
Connecting Ground and Neutral Wires
1. Remove center terminal block screw and the ground wire
by removing the external ground connector screw.
2. Connect ground and neutral wire to center terminal block.
24
)
Ring Connector
Direct Wire
4-wire direct
3-wire direct
Connecting Direct Wire Ground
3. Connect ground wire (green or bare) with external ground
connector screw.
Connecting Remaining Wires
4. Connect remaining wires with outer terminal block screws.
Publicité
Table des Matières
