Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Tools and Parts
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
Pliers (that open to
■
39.5 mm [1
⁄
"])
9
16
Tools needed for installation
Open end wrenches
■
1/2" and 9/16"
Torx®† T-20 Security
■
screwdriver
1/4" nut driver
■
Parts supplied
A
D
E
A. U-shaped hose form
B. Water inlet hoses (2)
C. Inlet hose washers (4)
D. Transit bolt hole plug (4)
Parts supplied for PD Models:
Service door lock cam
†® TORX is a registered trademark of Saturn Fasteners, Inc.
4
INSTALLATION REQUIREMENTS
Flashlight (optional)
■
Level
■
Wood block
■
Ruler or measuring tape
■
B
C
F
G
E. Removable tie strap
F. Drain hose
G. Hose clamp
Foam pads
Alternate Parts
Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, contact your
authorized Maytag distributor.
If you have
Laundry tub or standpipe
taller than 2.4 m (96")
Overhead sewer
Floor drain
Drain hose too short
Pedestal
You have the option of purchasing pedestals separately for this
washer. The pedestal will add to the total height of the washer.
Optional pedestal
Pedestal
Approximate
Height
height with washer
73 mm (2
⁄
")
1207 mm (47.5")
7
8
You will need to buy
Sump pump system (if not already
available)
Standard 76 L (20 gal.), 762 mm
(30") tall drain tub or utility sink and
sump pump (available from local
plumbing suppliers)
Siphon break, Part Number
285834; additional drain hose,
Part Number 8318155; and
connector kit, Part Number 285835
1.2 m (4 ft) drain hose extension
kit, Part Number 285863
Options
Color
Part Number
White
WHP0400VW
Publicité
Table des Matières
