Operation - Dexter 200SHS2.5 Manuel D'instructions

5. BEFORE PUTTING THE EQUIPMENT INTO OPERATION
WARNING: Clean the air vents on your power tool regularly. The
motor's fan will draw the dust inside the housing and excessive
accumulation of powdered metal may cause electrical hazards.
NOTE: Hook and loop sanding base is not a warranty item.
Dust extraction
We recommend the use of the dust extraction facility at all times.
To install the dust extraction tube, aimed at the grooves on the dust extraction port and
then insert the tube into the port.
Rotate the tube clockwise for locking.
A dust extraction system or a suitable vacuum cleaner is allowed to be connected to the
tube for enhancing the dust efficiency
Dust extraction bag is also provided.
To install the dust extraction bag, aimed at the grooves on the dust extraction port and then
insert the bag into the port.
Rotate the dust extraction bag clockwise for locking.
For efficient operation, always empty the dust extraction bag
Always keep the dust extraction holes in the sanding base free of obstructions.
WARNING: Do not use the dust bag when sanding metal. The hot
metal particles could cause residual wood dust or the box itself to
catch fire.

6. OPERATION

Switch on and off
1. To turn the sander on, push the O/I switch (1) forward.
2. To stop the sander, push the O/I switch (1) backward.
NOTE: Always lift the sander from the work before switching on or switch off.
FR
ES
PT
IT
EL
PL
UA
RO
EN
143