Victron energy BlueSolar 12/24-20 A Manuel page 5

1. DISCRIPTION
1.1 General
The BlueSolar Charger series uses Pulse Width Modulation (PWM) charge
voltage control combined with a multistage charge control algorithm. This
leads to superior charging and enhanced battery performance. The filtered PWM
power control system uses highly efficient and reliable power MOSFET
transistors.
Fully automatic temperature compensation of charge voltage is available to
improve charge control and battery performance
1.2 Features
Internal temperature sensor.
Three stage battery charging [bulk – absorption – float]
Protected against over current.
Protected against short circuit.
Protected against reverse polarity connection of the solar panels and/or
battery.
Low voltage load disconnect.
Intelligent software control.
PWM charging mode.
.
5