Introduction; Package Contents - brennenstuhl BCN 1221 Mode D'emploi

043909 BA_CO-Melder BCN 1221-0.qxp 01.10.15 09:49 Seite 20
Operating Instructions BCN 1221

1. Introduction

These operating instructions must be read com-
pletely and carefully. They are a component of
your newly purchased, battery-operated, carbon
monoxide detector and contain important infor-
mation concerning its operation and maintenance.
In the following, it will be referred to only as the
detector. All safety notices are to be observed in
the use of this product. If you have any questions
concerning the use of this product, contact your
dealer or our service office. These operating in-
structions are to be kept and must if necessary be
passed on to third parties.

2. Package contents

Immediately after unpacking the contents of your
detector's package must be checked for complete-
ness. Also check the detector itself for proper con-
dition.
1 x CO-detector BCN 1221
1 x 9 Volt block battery
2 x screws
2 x anchor bolts
1 x operating instructions
20