Instructions For The User; Instruction For The Operator - Unox CaldoLux XHC030 Mode D'emploi

Four cook & hold
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ENGLISH
the door and lay it on a flat surface.
6. With the screwdriver with Slotted driver remove the
cap and the bronze washer from the bottom of the
lid; after this proceed with the reversal of the door
(see following picture).
7. Turn the oven and lay it on the left side
8. Re-assemble the door inserting the hexagon
screws in the bronze kasher.
9. Assemble the stirrup on the bottom of the oven
paying attention to position properly the bronze
washer inside the hole you find on the stirrup.
5.
Remove
II. INSTRUCTIONS FOR
1.
10. Fix the stirrup with the two proper screws.
11. Position the oven in the horizontal position and
plug the oven back to the net.
THE USER
WARNING!
The appliance cannot be cleaned with a jet of
water.
Never wash the cavity with acids or aggressive
detergents. Use only water and soap.
The appliance is made for a specific professional
use and must be used by qualified personnel only.
INSTRUCTIONS FOR THE OPERATOR
WARNING!
Carefully read this user manual before starting to
operate with the appliance as it gives you important
information regarding safety during installation, use
and maintenance of the appliance itself.
Keep the manual in a safe place where the different
operators that work with the appliance can easily
find and read it.
For any eventual repair, please apply only to
UNO
R
ENGLISH
5

Publicité

Table des Matières
loading

Table des Matières