Publicité
Les langues disponibles
Les langues disponibles
However, due to weight differences and
individual styles of running, the belt may
be prone to shift sideways.
If the belt does shift to the left or right.
BELT OFFSET TO THE RIGHT.-
If the belt has moved to the right, turn
screw (R) on the right-hand side of the
machine a 1⁄4 turn clockwise. Note the
position of the belt, if after one minute the
belt is not completely centred then repeat
the operation. If you see that the belt has
moved too far over to the left then turn the
right
screw
back
anticlockwise direction. Fig.12.
As soon as you have adjusted the belt
you can begin exercising again.
BELT OFFSET TO THE LEFT.-
In the event that the belt has moved to
the left, turn screw (L) on the left-hand
side of the machine a 1⁄4 turn
clockwise. Note the position of the belt,
if after one minute the belt is not
completely centred then repeat the
operation. If you see that the belt has
moved too far over to the right then
turn the left screw back slightly in an
anticlockwise direction. Fig.12.
Important: Overtightening of the belt
can lead to a loss of speed on the
machine and even stretch the belt
itself. Bear In mind that one turn of the
right screw (R) in a clockwise direction
has the same effect on the position of
the belt as one turn of the left screw (L)
slightly
in
an
in
an
Consequently,
excessive belt movement you can use
either of the two screws in order to
avoid overtightening the belt.
INSPECTION.-
ATTENTION:
Periodically check that all of the
fastening
tightened and connected correctly.
Check and tighten all the parts on
your unit every three months.
Use of this machine with worn parts,
e.g. the running belt or rollers, may
cause the user injury.
When in doubt about any parts on the
machine, do not hesitate to get in touch
with the Technical Assistance Service
by phoning customer services (see last
page in manual).
We recommend that your use original
spare parts to replace any worn
components. The use of other spare
parts may cause injuries or affect the
performance of the machine.
THE MANUFACTURER KEEPS THE
RIGHT TO MODIFY THE PRODUCT
SPECIFICATIONS
PREVIOUS ADVISE.
12
anticlockwise
in
the
elements
are
WITH
direction.
event
of
duly
NO
Publicité
