Shaper ORIGIN S01-EN Guide D'utilisation page 22

Safety & Care
Do not expose power tools to rain or wet
conditions. Water entering the power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
When operating power tools outdoors use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
If operating a power tool in a damp location
is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of a GFCI
reduces the risk of electric shock.
Use appropriate extension cords. Only use
undamaged extension cords that match Origin's
plug. Extension cords should have an adequate
voltage and current rating that meets or exceeds
the electrical specifications listed on the
product label.
Always make sure that the spindle motor
connector is securely plugged into the side of
Origin while operating.
Personal Safety
Stay alert, watch what you are doing and use
common sense when operating power tools. Do
not use power tools while you are tired, or under
the influence of drugs, alcohol, or medication.
A moment of inattention while operating power
tools may result in serious personal injury.
14