Ariston SENSYS 3318585 Instructions D'installation Et D'utilisation page 69

display settings
Press OK to confi rm the choice, and
press the back button "
the previous screen.
Turn the knob and select:
- Start screen
when selecting the start screen set-
tings, you can choose which informa-
tion to display.
By selecting the "Customisable" dis-
play, you can select any information
as desired. Alternatively, you can
choose one of the preset screens:
Basic
Active sources
CO2 saving
Basic boiler
Complete boiler
Solar heating system (where present)
Zones (where present)
FWS (where present)
Press the OK button to confi rm your se-
lection. Press the back button "
return to the previous screen.
Turn the knob and select:
- Standby brightness
use the knob to adjust the brightness
of the display during standby periods.
Press the OK button to confi rm.
Turn the knob and select:
- Backlight time
" to return to
use the knob to set the time for which
the display backlight remains on after
the last time the system interface was
used and has remained inactive for a
certain period of time.
Press the OK button to confi rm.
Turn the knob and select:
- Start screen time
use the knob to select the time pe-
riod for which the main screen is dis-
played.
Press the OK button to confi rm.
Press the back button "
the previous screen.
" to
GB
" to return to
69