Heating Schedule Programming - Ariston SENSYS 3318585 Instructions D'installation Et D'utilisation

heating schedule programming

Schedule programming allows the boiler
to heat the room in accordance with your
own requirements.
Press OK to set heating schedule pro-
gramming. Turn the knob and select -
Complete menu
Press the OK button.
Turn the knob and select:
- Heating settings
Press the OK button.
The display screen shows:
- Set heating temperature
- Schedule programming
- Holiday function
- Auto function
Turn the knob and select:
- Schedule programming
Press the OK button.
The display screen shows:
- Free programming
- Guided programming
- Pre-set programs
- Programming/manual
Turn the knob and select:
- FREE PROGRAMMING
Press the OK button.
The display screen shows:
- All zones
- Zone 1
- Zone 2
- Zone 3
Turn the knob and select the zone in
which you wish to apply schedule pro-
gramming:
Press the OK button.
Turn the knob and select
- Set Comfort T
Press the OK button.
Turn the knob and adjust the room tem-
perature value during the comfort period
(the temperature value will fl ash on the
display).
Press the OK button to confi rm.
Turn the knob and select:
- Set Reduced T
Press the OK button.
Turn the knob and adjust the room tem-
perature value during the reduced pe-
riod (the temperature value will fl ash on
the display).
Press the OK button to confi rm.
Turn the knob and select:
- Set programming
Press the OK button.
Turn the knob and select the day or days
of the week you wish to program.
Every time a day is selected, press the
OK button to confi rm.
The days selected for programming ap-
pear on the display in a box.
Turn the knob and select save. Press the
OK button and turn the knob to set the
start of the heating period correspond-
ing to the fl ashing value. Press the OK
button to confi rm.
Press the OK button and turn the knob
to set the end time of the comfort period.
If you want to add new time periods, turn
the knob and select Add period; press
the OK button.
Repeat the above procedure to set the
start and end times for each comfort pe-
riod added.
Once programming is complete, turn the
knob and select Save.
Press the OK button to confi rm.
GB
73