AR Blue Clean AR 390 SS Manuel D'assemblage, D'entretien Et D'utilisation page 8

PREPARATION ASSEMBLY INSTRUCTIONS
6
I
I
Locking Spray Gun (before Lance installation)
To lock the trigger of the spray gun (I), aim the gun
away from you and push the lock button from right to
left. After doing so, squeeze or pull the trigger to make
sure it is locked and will not move. Always leave lock
button in locked position when not in use. This ensures
the gun is in "safe" mode until it is ready for use.
8
G
Attach nozzles (F) into end of lance (G) by pressing
selected nozzle into place. It will make a "click" sound
when firmly in place.
Note: Always push safety lock button to lock trigger
when changing lances and nozzles to ensure that they
do not accidentally eject with force during removal.
8
H
Lock
H
Unlock
F
7
G
Lance Installation
While spray gun (H) is in the locked position, insert
lance (G) into the end of spray gun by inserting and
turning clockwise until fully in place. To remove
turn counterclockwise.
9
1
2
G
To remove nozzle (F), pull back on collar of lance (G)
and pull out nozzle.
H
F