Pump Saver - AR Blue Clean AR 390 SS Manuel D'assemblage, D'entretien Et D'utilisation

PUMP SAVER

OPERATING INSTRUCTIONS
Pump Saver is a product that protects and prolongs
the life of the pump. This will keep the internal parts
of the pump lubricated and protected from freezing
while being stored in ALL climates. It also assists with
protection from internal corrosion. The Blue Clean part #
is: PW64511 (16oz. bottle). Order online at
www.arblueclean.com.
Pump Saver Instructions
Follow the previous storage instructions for your power
washer. To prevent staining, protect the surface under
the power washer from any excess fluid. Wear eye
protection when using this product.
Turn unit off and disconnect the gun before adding pump
protector. Unscrew threaded top from bottle to remove
seal and reattach threaded top to bottle.
Remove black cap from bottle.
1) Place top of pump saver bottle onto the garden hose
adapter (G) previously installed to pressure washer
inlet.
2) Secure pump saver bottle by turning in a clockwise
direction.
14
3) Turn power on. Turn the power washer off as soon as
the Pump Saver begins to exit the HP hose.
Note: Instructions on Pump Saver Bottle are generic and
not model specific.
G