Touch Panel Operation Oveview - Panasonic CQ-VD7003U Manuel D'instructions

Touch Panel Operation Overview
❒ Notes on the Touch Panel
Before operation
¡Clean the surface of the touch panel.
Operation
13
¡Use only your fingers to operate the touch panel.
¡Do not press the panel forcefully.
¡Do not scratch the panel with fingernails or any
hard objects.
Example: DVD mode
Note :
¡The following picture is partly darkened for explanation.
¡Displaying contents and their positions partly vary with each mode. Refer to the description of each mode for details.
Volume Current
indicator mode
Source Button
(Content varies with each
source)
Displays the Source Selection Screen.
Source Selection Screen
Source Selection Screen appears.
Touch desired source button.
Touch to quit.
Press [SRC] to change to
desired mode.
Note :
¡The screen above appears when no external
device is connected to AV1, AV2, and the
Expansion Module (CY-EM100U, option).
14
CQ-VD7003U
(a page 47)
The State of Operation Screen
Disc indicator (a page 19)
(Lights when a disc is loaded)
¡Do not use a pen or other sharp implements to
operate the touch panel.
¡Do not bump the front panel.
a
Failure to observe the above may damage or
break the glass on the surface of the touch
panel.
Clock time
Prohibition
Input is not possible because the user has
attempted to perform an operation which
is not supported by the disc contents.
Menu Button
Displays the Menu Screen.
Menu Screen
Menu Screen appears. Select desired setting.
Menu Setting, (a page 30)
Press [MENU] to let Menu
Screen appear.
Display Button
(a next page)
(a page 32)