Symptoms
Oven control beeps
and displays an F
error code.
Clock is flashing.
Strong odor.
Burners are not
lighting properly after
cleaning the cooktop
surface.
When lighting just one
burner, clicking noise
is heard from all the
burners.
• Check the main gas shut-off valve or
the oven gas shut-off valve and call
for service.
• Remove the power from the range
for five minutes and then reconnect
the power. If the function error code
repeats, call for service.
Power outage or surge. Reset the clock. If the oven was in use, you must reset it
by pesssing the Clear/Off button. Reset the clock and any cooking function.
An odor from the insulation around the inside of the oven is normal for the first few
times the oven is used.
Make sure that the burner heads and caps are completely dry and properly
positioned.
This is normal. Electric spark igniters from the burners cause the clicking noise. All
the spark igniters on the cooktop will activate when igniting just one burner.
Possible Cause / Solution
CODE
F-3
F-9
TROUBLESHOOTING
CAUSE
Key error
Oven not heating
45