Turning The Preheat Alarm Light On/Off; Adjusting The Beeper Volume; Selecting Fahrenheit Or Celsius - LG LRG3061 Serie Manuel Du Propriétaire

For Model: LrG3193
1
Press and hold the Clock button for 3 seconds.
2
Press Clock repeatedly until AdJU appears in
the display.
3
Using the + button, enter the amount you wish to
increase the temperature.
4
Using the – button, enter the amount you wish to
decrease the temperature.
5
Press Start to accept the change.
For Model: LrG3061, LrG3060
1
Press Settings repeatedly until AdJU appears
in the display.
2
Using the + button, enter the amount you wish to
increase the temperature.
3
Using the – button, enter the amount you wish to
decrease the temperature.
4
Press Start to accept the change.
nOTE
• This adjustment does not affect the broiling.
The adjustment is retained in memory after
a power failure. The oven thermostat can be
increased (+) or decreased (-) as much as 35
°F or 19 °C.
• Once the thermostat is increased or decreased,
the display shows the adjusted temperature
until it readjusts.

Turning the Preheat Alarm Light On/Off

When the oven reaches its set temperature, the
preheating alarm light flashes 5 times or until the
oven door is opened.
You can activate or deactivate the preheating alarm
light.
For Model: LrG3193
1
Press and hold the Clock button for 3 seconds.
2
Press Clock repeatedly until PrE appears in the
display.
3
Press +/– to turn the light on/off.
4
Press Start to accept the change.
For Model: LrG3061, LrG3060
1
Press Settings repeatedly until PrE appears in
the display.
2
Press +/– to turn the light on/off.
3
Press Start to accept the change.

Adjusting the Beeper Volume

For Model: LrG3193
1
Press and hold the Clock button for 3 seconds.
2
Press Clock repeatedly until Beep appears in
the display.
3
Press +/– to select Hi, Lo or Off.
4
Press Start to accept the change.
For Model: LrG3061, LrG3060
1
Press Settings repeatedly until Beep appears in
the display.
2
Press +/– to select Hi, Lo or Off.
3
Press Start to accept the change.

Selecting Fahrenheit or Celsius

Set the oven temperature display to show either
Fahrenheit (°F) or Celsius (°C) units. The oven
defaults to Fahrenheit unless changed by the user.
For Model: LrG3193
1
Press and hold the Clock button for 3 seconds.
2
Press Clock repeatedly until Unit appears in the
display.
3
Press +/– to select F (Fahrenheit) or C (Celsius).
4
Press Start to accept the change.
For Model: LrG3061, LrG3060
1
Press Settings repeatedly until Unit appears in
the display.
2
Press +/– to select F (Fahrenheit) or C (Celsius).
3
Press Start to accept the change.
OPERATION 29