Publicité
5
Cleaning and Care
• Unplug your oven before cleaning.
• Do not use abrasive cleaners, steel wools, rough
washing clothes or abrasive chemicals such as
sulphur or chloride on or at any parts of your mi-
crowave oven.
Outer surfaces
• To clean the outer surfaces of the oven, first
wipe them with a soft cloth soaked in warm
soapy water. Then wipe them dry again with a
soft cloth.
• Do not allow water ingress into the ventilation
openings in order to avoid damage to the live
parts inside the oven. Clean the control panel
of your microwave oven only with a damp and
soft cloth.
• Do not use cleaning sprays or more soap and
water. They may cause problems in control
mechanism.
• Failure to maintain the oven in a clean condition
could lead to deterioration of the surface that
could adversely affect the life of the appliance
and possibly result in a hazardous situation.
• Cleaning the door seals and adjacent parts: Use
hot soapy water. Clean with a dish cloth, do not
scour. Do not use a metal or glass scraper for
cleaning.
Microwave Oven / User Manual
Inner surfaces
To clean the inner surfaces of the oven:
• To soften the dried stains, place a glass of water
inside the microwave oven and heat for 2-3 min-
utes. The steam created will soften dried stains
making cleaning easier.
• Clean the inner surfaces and ceiling with a soft
and soapy cloth. And dry again with a soft cloth.
• To remove the odours inside the oven, boil a mix-
ture of water and a few table spoons of lemon
juice for a couple of minutes inside the oven.
• To clean the inner base of the oven, remove
the roller glass tray and roller support. Wash
the roller glass tray and roller support in soapy
water. Then, rinse and dry them.
• Before starting the oven, install the roller sup-
port and glass tray securely.
• When cleaning the inner surfaces of the oven
door, use a non-abrasive soft sponge or cloth.
For transportation;
• Unplug the appliance.
• Pack the glass tray in a way to prevent them from
breaking and moving inside the oven. Transport
it separately if needed.
• Tape the front door to the body.
• Prevent impact against the front glass, door and
panel.
• Transport the product in normal position. Do not
lean it aside or back.
19 / EN
Publicité
