Dörr MVL-77 Notice D'utilisation page 11

05 | OPERATION
05.1 Switching On/Off
Press the On/Off/Menu button
(08) shows the remaining battery power in h (hours) or m (minutes). The battery symbol shows the battery capacity graphically:
Press On/Off/Menu button
05.2 Brightness and colour temperature
Press On/Off/Menu button
shows the selected menu point in the display (08):
Brightness
(11) to increase the brightness and colour temperature.
Press the button
Press the button (09) to decrease the brightness and colour temperature.
Brightness is adjustable in 1% steps, while colour temperature is adjusted in 100° Kelvin steps.
05.3 Pre-set light and flashing effects
To access the Fade-in/fade-out functions
display changes to the next view. The symbol
Fade-in/fade-out mode:
Press the button (11) or
A – Fade-in/fade-out mixed light
Press On/Off/Menu button
11
(10) for about 2 seconds in order to turn on the LED video light. During operation, the display
(10) for about 2 seconds in order to turn off the video light.
(10) shortly to switch from brightness
and the Flashing effects
shows the selected menu point in the display (08):
(09) to select the desired effect (the selected effect is highlighted in white):
B – Fade-in/fade-out warm light
(10) shortly to switch from Fade-in/fade-out
to colour temperature
Colour Temperature
, double-click the On/Off/Menu button
to Flashing effects
and back. The symbol
C– Fade-in/fade-out cold light
.
(10). The
doerr-foto.de