Preliminary Steps; Transport Check; Installing The Appliance; Connecting The Appliance - Whirlpool ACE 102 IX Mode D'emploi

PRELIMINARY STEPS

Transport check

After unpacking the appliance, check that it is undamaged and that all the accessories are present and correct. Do not use the
appliance is there is any visible damage. Contact the After-sales Service.

Installing the appliance

WARNING

Connecting the appliance

WARNING
Connect the machine to a professionally installed power socket having a current rating of at least 10A and an efficient earth
connection. If the appliance plug and socket are incompatible, have an electrician replace the socket with one of a suitable type.
Observance of safety directives requires that a multi pole switch with a minimum contact gap of 3mm be used for the
installation. Do not use multiple plug adapters or extension cords.
WARNING

SCRAPPING

Electrical appliances must not be disposed of as general household waste. Appliances marked with this symbol fall
under European Directive 2002/96/CE. Electrical and electronic appliances must not be disposed of as household
waste, but delivered to an authorized collection centre for scrapping. Correct scrapping of the appliance after its
working life prevents damage to the environment and potential health hazards. For further information on the
scrapping of the appliance, contact your local authority, the waste disposal service or the shop where you
purchased the product.

DECLARATION OF CONFORMITY

This appliance conforms to the following EC directives:
• Low Voltage Directive 2006/95/EC and subsequent amendments.
• Directive EMC 2004/108/EC and subsequent amendments.
The materials and articles intended to come into contact with foodstuffs conform to the requirements of European regulation
(EC) N°1935/2004.
All manuals and user guides at all-guides.com
• Installation must be carried out by a qualified technician in accordance with local
regulations (see chapter BUILT-IN INSTALLATION).
• Keep the packaging material (plastic bags, polystyrene parts, etc.) out of the reach
of children.
• Under no circumstances should the appliance be installed in rooms where the
temperature may drop to 0°C.
• Adjust the water hardness setting as soon as possible, following the instructions in
chapter BUILT-IN INSTALLATION.
Make sure that the voltage indicated on the rating plate on the underside of the machine
corresponds to the domestic power supply voltage.
The mains power supply must have electrical disconnect devices in compliance with
national installation standards.
GB26