Publicité
GB
Electrical connection
NOT FOR UK
The cookert hood should be connected to a
standard accessible socket.
Electrical data:
Are to be found on the name plate inside the
appliance after removal of the filter frame.
For repairs, the appliance must always be
disconnected from the mains.
Length of the connecting cable: 1,20 m.
For necessary fixed connection.
Under all circumstances the appliance may be
connected only by an electrical fitter registered
with the responsible local power supply
enterprise .
A separator must be provided on the installation
side. Switches with a contact opening of more
than 3 mm that switch off all poles are regarded
as separators. They include on-load switches
and contactors.
This appliance statiefies the EC regulations for
radio screening.
12
Publicité
