TrekStor SurfTab ventos 7.0 Mode D'emploi page 29

16) Connecting other Devices
16.1) Connecting SurfTab® to a PC
a) Connect the SurfTab to your PC with the micro USB cable provided
b) After a period, the flash-disc symbol will be shown at the bottom right
of the display of your SurfTab. Select the symbol and following touch
"usB
connected
c) In the following display choose "t
d) A short moment later, the memory of the SurfTab will be shown as an
external drive in the explorer of your PC. From there you can load, copy,
delete and move files as usual.
In order to separate your SurfTab from your PC select "t
i
and following this separate it from your PC.
16.2) Connecting a USB Device
External USB devices, for example USB flash discs, can be attached via the
micro USB host adaptor cable supplied.
In order to drag files between your SurfTab and an external memory device
i
you need an application with the function of a data browser (for example
"Es d E
atEi xplorEr
a) Attach the external USB memory device to the SurfTab via the micro
USB host adaptor cable.
b) The message "P
until the message is no longer shown.
c) Via your data explorer app you can load, copy, delete and move files as
usual.
In certain circumstances the energy supply of the SurfTab is not sufficient
i
in order to affect all functions of the USB device attached. For this reason,
supply additional power to external USB devices via a mains cable.
/ t
oucH to coPy files to
" or "F b ").
ilE rowsEr
reParing eXternal storage
/
froM your coMPuter
usB
urn on storage
" will be shown in the display. Wait
".
".
usb
urn oFF storagE
29
"
EN