TrekStor SurfTab ventos 7.0 Mode D'emploi page 22

6) Controls and Connections of SurfTab®
A) Camera
B) Home button
C) Audio-Out connector
D) Micro-HDMI connector
E) Microfone
F) Micro-USB connector
G) On/OFF switch
H) microSD-/microSDHC card slot
I) Speaker
7) Charging SurfTab®
Fully charge your SurfTab before you use it for the first time. Connect
your SurfTab with the micro USB cable to a computer or connect it using
the mains adaptor included. After about 3 hours SurfTab is fully charged.
Loading time via a PC is considerably longer.
The maximum battery runtime is reached after about 10 battery charging cycles.
i
8) Switching on SurfTab®
After charging your SurfTab you can switch it on. In order to start the device,
press the on/off switch for 3-5 seconds. As soon as the device is switched
on the lock screen appears. Place your fingertip on the lock symbol and
drag it to the open lock on the right. Your SurfTab will now show the home
screen.
If you are using your new SurfTab for the first time, a configuration assistant
i
appears which helps you to adjust the first important settings on your
SurfTab. The settings which you undertake here (for example language)
can also be altered again under "s
EN
22
" in the application menu.
Ettings