Appliance Installation - AEG MTD 350 Manuel D'utilisation Et Installation

10.2.1 Appliance installation

» Mount the appliance on the wall.
Note
The wall must have a sufficient load-bearing capac-
ity.

» Undo the cover fixing screws by two turns.
» Undo the snap fastener using a screwdriver.
» Remove the appliance cover with the heater towards
the front.


Installation - for contractors
» Using pliers, break out the knock-out for the power
cable in the appliance cover. Correct the contours
with a file if necessary.
» Use the appliance back panel as a drilling template.
» Secure the appliance back panel to the wall with suit-
able rawl plugs and screws.



31