Residual Heat Indicator; Grill Heating Element; Lava Stone Container; Water Bath - Siemens ET475MU11E Mode D'emploi

Residual heat
indicator

Grill heating element

Lava stone container

Water bath

30
All manuals and user guides at all-guides.com
The grill has a two-stage residual heat indicator.
k
If appears on the display, the grill is still hot. As
the grill cools down further, the display changes to
The display remains lit until the grill has cooled down
sufficiently.
Only clean the grill when the residual heat indicator
has gone out.
Caution, risk of burns! The grill heating elements
heat up during operation. Wait until the appliance
has cooled down before touching the grid iron or the
grill heating elements.
You might notice that the grill heating elements
switch on and off automatically during the grilling
time. This is normal.
You can set the heating elements together or
independently.
You can tilt up the heating elements after taking off the
grid iron. For safety reasons, tilting up a heating
element will result in that heating element being
switched off, even if the control is switched on.
Before using the appliance for the first time, take the
lava stones out of the plastic bag and pour them into
the lava stone container.
Always fill the grill trough with water before each use.
The amount of water depends on whether you wish
to grill with or without lava stones.
Caution, risk of scalding! If water splashes onto the
hot grid iron or grill heating element when adding
more water to the trough, this will result in hot steam
being given off.
h
.