Ezviz MKAC-57-242500M Guide Rapide page 19

Use AP Mode for Wi-Fi Configuration
-For AP hotspot configuration, press the Reset button for 5 seconds and then you will hear voice prompt.
-Wait for a few seconds until you see the LED indicator flashes blue.
-Follow the voice prompt to connect Wi-Fi.
-Go back to EZVIZ app after successful connection. Tap Next.
-Search out the Wi-Fi you want the device to connect and enter password.
SD Card Management
1. In the EZVIZ app, tap the Storage Status in the Device Settings page to check the SD card status.
2. If the card status displays as Uninitialized, tap to initialize it.
The status changes to Normal and it can store videos and/or pictures.
Wi-Fi Name: EZVIZ_XXXXXXXXX (9-digit Serial No.)
Default Password: EZVIZ_XXXXXX (Verification Code)
eg. Default Password: EZVIZ_ABCDEF
Serial No. and verification code are listed on the cover of this manual.
10