Wiring Diagram; Troubleshooting Guide - CombiSteel 7472.0120 Mode D'emploi

10 WIRING DIAGRAM

It is printed on a sticker in the engine compartment.

11 TROUBLESHOOTING GUIDE

PROBLEM
The appliance does not operate
Temperature inside the appliance is too cold
Temperature inside the appliance is too warm
/ Compressor seems to run too long
Popping or cracking when compressor comes
on
Bubbling or gurgling sound, like water boiling
Vibrations
POSSIBLE CAUSE

Not plugged in

The circuit breaker tripped or blown fuse

Compressor is out of order

Thermostat is not set correctly or is out of order

A large amount of warm / unfrozen products might have
been stored recently. Wait until the appliance reach its
selected temperature

The door(-rs) are not closed completely

The condenser is covered with dust and dirt (only for
condensers with aluminum sheets)

The outside temperature is hotter than normal

There is no enough air circulation space in front of engine
compartment openings

The condenser fan motor is out of order

The evaporator fan motor is out of order

Products are placed too close to evaporator fan

blade cover, blocking the air circulation

Ice has build-up on evaporator aluminum sheets

There is a refrigerant leakage in the circuit

This is normal. Sound will level off or disappear as the
appliance continues to run

This is normal. It becomes from the refrigerant circulating

The appliance is touching the wall.

Move it from the wall The appliance is not a level surface.
6