Grundig G4 Manuel Du Propriétaire page 16

G4 WORLD RECORDER
SETTING THE ALARM TO PLAY MUSIC FROM A
SD/MMC CARD OR FLASH MEMORY
1. Turn on the radio and select SD/MMC or flash memory mode to
AND SD/MMC CARD, below.
2. With the radio turned off press ENTER, then press SW.
flashes in the top of the display.
3. En
press ENTER if you wish to use the existing alarm time.
4. Press the volume buttons to set the desired volume at the alarm
time and press ENTER or press ENTER if you choose to use the
existing volume. Note that the sleep timer appears in the display.
from 00-99 minutes, or press ENTER to use the existing time. The
ACTIVATING AND DEACTIVATING THE ALARM
After setting the alarm with any of the methods described above,
it's activated. To deactivate it, turn the radio off and press FM, MW
or SW corresponding to the symbol you wish to choose (the symbol
flashes at the top of the display), then press EXIT. To reactivate it, turn
the radio off and press FM or MW or SW, then press ENTER.
SLEEP TIMER
With the radio on, do a long press of the EXIT button. The sleep timer
symbol and - - flash in the upper right corner of the display. Enter
the time that you want the radio to play in minutes, 01-99, with the
timer symbol and the number of minutes in the display, after which
it turns off.
16
OWNER'S MANUAL