Disconnect The Headset; Reconnect The Headset - Nokia BH-501 Mode D'emploi

G e t s t a r t e d
If your music player does not have a keypad, the device may use the
Bluetooth passcode 0000 by default. If this is not the case, see the user
guide of your music player to change the default Bluetooth passcode
to 0000.
If the pairing is successful and the headset is connected with your music
player, the indicator light of the headset flashes blue slowly. To connect
the headset also to your phone, make the connection from your phone as
described in its user guide.

Disconnect the headset

To disconnect the headset from your phone or music player, switch off
the headset, or follow the instructions in the user guide for your phone
or music player. You do not need to delete the pairing with the headset
to disconnect it.

Reconnect the headset

You can pair the headset with up to ten phones and music players
in total but connect it to only one device at a time.
To connect the headset to the paired phone or music player that you
have last used with it, switch on the headset and press the multifunction
key. To connect the headset to some other paired phone or music player,
follow the instructions in the user guide for the phone or music player.
If you have a Nokia phone, you can set it to connect with the headset
automatically when the headset is switched on. On your Nokia phone,
change your paired device settings in the Bluetooth menu.
10