Disconnect The Headset - Nokia BH-500 Mode D'emploi

player. After pairing and connecting the headset with your phone, do as
follows:
1. Switch off the headset.
2. Switch on the music player.
3. Press and hold the power key of the headset until the indicator light
flashes blue rapidly.
4. Follow the pairing instructions in the user guide for your music player.
When the music player asks for a device to pair, select Nokia BH-500
from the list. If you are asked for a Bluetooth passcode, enter 0000 on
the music player.
If your music player does not have a keypad, the device may use the
Bluetooth passcode 0000 by default. If this is not the case, see the user
guide of your music player to change the default Bluetooth passcode
to 0000.
If the pairing is successful and the headset is connected with your music
player, the indicator light of the headset flashes blue.

Disconnect the headset

To disconnect the headset from your phone or music player, switch off
the headset, or follow the instructions in the user guide for your phone
or music player. You do not need to delete the pairing with the headset
to disconnect it.
G e t s t a r t e d
11