System Settings; Display Brightness; Backlight Time-Out - Philips Prestigo SRU8015 Mode D'emploi

SRU8015_IFU_Bundel1v4.qxd
4.4.3 Delete a Function
To delete an extra function:
Go to Setup - More Functions, select Delete Function and
1
press
Select the device from which you want to delete a function.
2
Select the function you want to delete.
3
Confirm you want to delete the function.
4
The function is deleted.
4.5

System Settings

4.5.1

Display Brightness

To change the brightness of your display:
Go to Setup - System Settings, select Display Brightness and
1
press
Select your preferred brightness with the rotary wheel:
2
20%, 40%, 60%, 80%, 100%.
D Note
A preview of the selected brightness is shown as you turn the rotary
wheel.
Confirm the new brightness setting.
3
The brightness of the display is changed.
4.5.2

Backlight Time-Out

When you use the SRU8015, the backlight turns on. After 5 seconds it
turns off again.
To change this time out:
Go to Setup - System Settings, select Backlight Time-Out and
1
press
Select the preferred backlight time-out with the rotary wheel:
2
3 seconds, 5 seconds, 10 seconds, 20 seconds.
Confirm the new time-out setting.
3
The backlight time-out is changed.
D Note
The backlight time-out has an impact on the lifetime of the batteries,
the longer the backlight stays on, the faster the batteries drain.
4.5.3 Key Backlight
To turn on and off the key backlight:
Go to Setup - System Settings, select Key Backlight and
1
press
Select On or Off with the rotary wheel.
2
Getting the Most out of Your SRU8015
16-05-2007
.
.
.
.
17:01 Pagina 15
15