Renkforce 1519511 Notice D'emploi page 19

If the product is already connected to the mains voltage, first switch off all contacts of the associated
mains socket by deactivating the circuit breaker or turning out fuse; then switch off the associated FI
protection switch.
Only now unplug the garden pump mains plug from the mains socket. Do not operate the product any-
more afterwards, but take it to a specialist workshop.
Never perform any repairs on your own. Always leave them to a specialist!
• If you have reason to believe that the garden pump can no longer be operated safely, disconnect it im-
mediately and make sure it is not unintentionally operated; pull the mains plug from the socket. It can be
assumed that safe operation is no longer possible if:
- the garden pump or connection lines show visible damage
- the garden pump no longer works
- the garden pump has been transported or stored under difficult circumstances
- there has been heavy stress during transport.
• Always disconnect the mains plug from the mains socket when you are no longer using the product, for
troubleshooting or for cleaning/maintenance.
• Never pull the mains plug from the mains socket by pulling the cable. Always pull the mains plug from
the mains socket by the lateral grip areas.
Never touch the mains plug with wet or damp hands; danger to life from electric shock!
• Only transport the product at the carry handle but never at the mains cable or hose.
• If the product is brought from a cold into a warm room (e.g. for transport), it is possible that condensation
will develop. This causes danger to life from electric shock!
Therefore, you should allow the product to warm up to room/ambience temperature before using it or
connecting it to the mains voltage. This may take several hours.
19