The following kinds of support are available
for the Style series :
- a single (ref.: 936301) or a double si -
ded (ref.: 936300) one, which co mes
with a long brac ket to be ins tal led ei -
ther to the wall or the cei ling, (Fig.: 1)
- a double si ded (ref.: 936302) one to
be sus pen ded to the cei ling by a chain,
(Fig.: 2).
- a re ces sed moun ting ca sing for
clocks such as Style 5, 5S and 7 mo -
dels (See bo o klet ref 605416).
Installation through a support with a long
bracket
- Pass the cables through the bracket hole,
- Set the support wall plate to its relevant
location (wall or ceiling). Fig.: 4
- Install the clock fixing plates and tighten
them by means of the 2 screws. Fig.: 3,
- Connect the clock cables to the terminal of
the fixing plates (see Style clocks instruction
manual).
Installation through a chain bracket
- Fix the 2 wall plates of the clock together as
per fig.: 4,
- Pass the chain through the 2 holes located
on the top of the clock brackets,
- Attach the chain to be installed to the ceiling
to the hooks,
- Install and connect the clocks (see Style
clocks instruction manual).
BRACKET FOR WORLD STYLE
INSTALLATION INSTRUCTIONS
When receiving please check nothing is broken otherwise make a claim near shipping company
Fig. 1
Fig. 2
Fig. 3
Wall fixing
Fixing through 2 screws (1)
Fig. 4
Vertical fixing through 4 screws
Style 7 Date
Style 7
Style 5
Chain holes
Ceiling fixing
Cable hole
Horizontal fixing through 3 screws
TRÉMENTINES 49340 FRANCE
Style 5S
Style 5D