Select Button - Stiebel Eltron IA Manuel D'utilisation Et Installation

Explanation of functions
Transmission control light
A radio signal is displayed by the lighting up of the transmission
control light.
The transmission control lamp flashes when transmitting if the bat-
tery power is reduced.
The transmitting power or the radio range will be reduced through
the reduction in the performance of the battery. If the transmission
control light no longer lights up when a button is pressed, the bat-
tery has to be replaced.

Select button

You can select up to 5 channels with the Select button. The indi-
vidual channels are indicated through illumination of the relevant
LED on the status display.
- 2 7 -