Publicité
Les langues disponibles
Les langues disponibles
•
Assemble the worktable on a clean, level surface.
•
Remove all items from the packaging box and ensure that all parts listed on page 4 are included.
•
When installing parts that have more than one screw, tighten all screws by hand before tightening
them with the screwdriver.
5
Screw holes face inward
Step 1: Install L-bracket (47)
Attach 4 L-brackets (47) to 1 leg piece (5) using 8 screws
(50) and 8 lock washers (59) as shown. Repeat with the
other leg.
59
NOTE: Do not fully tighten the screws. This will help you
make any adjustments in alignment.
Step 2: Install Leg Piece (5)
Attach both leg pieces (5) to the wood top (1) using 16
screws (50) and 16 lock washers (59).
50
NOTE: Make sure the top of the legs are attached to top,
and the screw hole side of the legs to the wood
59
top. The screw hole side of the legs are facing inward.
Do not fully tighten the screws. This will help you
make any adjustments in alignment.
5
MD
Publicité
