Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION MANUAL
CZ3000
Self-aligning Magnetic Shearlock
4] MOUNTING INSTRUCTIONS
4] MOUNTING INSTRUCTIONS
Make sure that there are no pieces missing in the mounting kit. Get the right tools according
to the installation type (Drill, screw drivers, metre tape,...) and follow the mounting
instructions of the CZ3000.
A - Wooden door
1
Make a cut on the door leaf and a cut
on the door jamb in order to insert
the magnet and the armature plate
of the CZ3000 magnet. Then mark
the mounting holes of the mounting
screws. Drill the mounting holes of the
magnet and of the armature plate in
order to facilitate the screwing. Drill
the cable access hole.
B - Aluminium door
1
Make a cut on the door leaf and a cut
on the door jamb in order to insert the
magnet and the armature plate of the
CZ3000 magnet. Then mark the moun-
ting holes of the mounting screws
and drill the mounting holes of the
magnet and of the armature plate in
order to facilitate the screwing.
2
Insert the cable of the magnet. Un-
fasten the screws on the side of the
armature plate (1) with the Allen
key. Mount temporarily the CZ3000.
Then adjust the gap between the
magnet and the armature plate by
adjusting the top screws on the arma-
ture, allow 2mm distance maximum.
Tighten the 2 screws on the side of the
armature plate (2) once the test on
magnet has been successfull.
2
Mount the back plate of the housing
(note that the screws are not inclu-
ded). Unfasten the screws on the side
of the armature plate (1) with the Allen
key. Mount temporarily the CZ3000.
Then adjust the gap between the
magnet and the armature plate by
adjusting the top screws on the arma-
ture, allow 2mm distance maximum.
Tighten the 2 screws on the side of the
armature plate (2) once the test on
magnet has been successfull.
Fabricant de Contrôle d'Accès depuis 1985
1
2
1
2
3
Fasten defi nitively the magnet on the
door.
3
Place the magnet on the back plate of the
surface housing as well as the armature on
the second back plate of the surface hou-
sing and fasten defi nitively the magnet on
the door.
(x8)
3
Publicité
Table des Matières
