Bosch UniversalChain 18 Notice Originale page 20

20 | English
onment. There is a risk of fire due to the charger heating
up during operation.
Do not cover the ventilation slots of the battery char-
u
ger. Otherwise, the battery charger can overheat and no
longer operate properly.
For increased electrical safety, we recommend using a re-
u
sidual current device with a max. tripping current of 30
mA. Before using, always check your residual current
device.
Symbols
The following symbols are important for reading and under-
standing the original instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the product in a better and safer
manner.
Symbol Meaning
Carefully check the area where the tool is
to be used for wildlife and pets. Wild an-
imals and pets can be injured by the ma-
chine during operation. Thoroughly
check the working area and remove any
stones, sticks, wires, bones and foreign
objects.
Movement direction
Reaction direction
Weight
Switching on
Switching off
Permitted action
Prohibited action
Audible noise
Accessories/Spare parts
Product description and
specifications
Read all safety warnings and all instruc-
tions. Failure to follow the safety warnings and
instructions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the ending of this operat-
ing manual.
F 016 L94 153 | (04.02.2021)
Intended Use
The power tool is used for sawing trees and tree trunks near
the ground. Cuts can be sawed with or across the grain.
This power tool is not suitable for sawing mineral materials.
This power tool is not intended for felling trees.
Delivery Scope
Carefully remove the machine from its packaging and check
if the following parts are complete:
– Chain saw
– Cover
– Saw chain
– Chain bar
– Chain guard
– Chain saw oil
– Operating instructions
Battery and charger are included in certain executions.
When parts are missing or damaged, please contact your
dealer.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Rear handle (insulated gripping surface)
(2) On/Off switch
(3) Lock-off button for On/Off switch
(4) Oil filler cap
(5) Front handle (insulated gripping surface)
(6) Hand guard
(7) Oil level gauge
(8) Gripping teeth
(9) Chain guard
(10) Tip protector
(11) Chain bar
(12) Saw chain
(13) Chain-tensioning ring (red)
(14) Clamping knob
(15) Cover
(16) Battery charge-control indicator
(17) Battery
(18) Battery unlocking button
a)
(19) Fastening bolt
(20) Drive sprocket
(21) Oil outlet
(22) Oil seal
a) country specific
Accessories shown or described are not included with the
product as standard. You can find the complete selection of ac-
cessories in our accessories range.
Bosch Power Tools