AUTO-HAK F10 Instructions De Montage page 5

Towbar accessories:
Towing hitch (without electrical set)
F10
Cat. no.
Class: A50-X
Designed for:
Manufacturer: PEUGEOT
Model: 605
produced since 1990 till 2000
Approval number according to Directive 94/20/EC: e20*94/20*0642*00
This towbar is designed according to rules of safety traffic regulations. The towing
hitch is a safety component and can be install only by qualified personnel. Any
alteration or conversion of the towing hitch is prohibited and would lead to
cancellation of design certification. Remove insulating compound and under seal
from vehicle (if present) in the area of the matting surfaces of the towing hitch. The
vehicle manufacturer's specifications regarding trailer load and max. vertical cup
load are decisive for driving, and values for the towing hitch cannot be exceeded.
D-value formula:
Max trailer weight [kg] x
+
Max trailer weight [kg]
PPUH AUTO-HAK S.J.
Produkcja Zaczepów Kulowych
Henryk & Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel/fax (059) 8-414-414; 8-414-413
e-mail: office@autohak.com.pl
www. autohak.com.pl
Technical data:
D-value: 8,41 kN
maximum trailer weight: 1500 kg
maximum vertical cup mass: 75 kg
Foreword
Max vehicle weight [kg]
9,81
=
X
1000
Max vehicle weight [kg]
D [kN]