System Startup; System Software - Clevo W155 Guide Utilisateur Concis

System Startup

1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and make sure it is locked in position.
4. Securely attach any peripherals you want to use with the
computer (e.g. keyboard and mouse) to their ports.
5. Attach the AC/DC adapter to the DC-In jack at the rear of the
computer, then plug the AC power cord into an outlet, and
connect the AC power cord to the AC/DC adapter.
6. Use one hand to raise the lid/LCD to a comfortable viewing
angle (do not exceed 130 degrees); use the other hand (as
illustrated in Figure 1) to support the base of the computer
(Note: Never lift the computer by the lid/LCD).
7. Press the power button to turn the computer "on".

System Software

Your computer may already come with system software
pre-installed. Where this is not the case, or where you are
re-configuring your computer for a different system, you
will find this manual refers to Microsoft Windows 7.
Models Differences
This notebook series includes different models that vary
slightly in design style, color and general appearance. Note
that though your computer may look slightly different
from that pictured throughout this documentation, all
ports, jacks, indicators, specifications and general func-
tions are the same for all the design styles.
Figure 1
Opening the Lid/LCD/
Computer with AC/DC
Adapter Plugged-In

Shut Down
Note that you should al-
ways shut your computer
down by choosing Shut
Down from the Start
Menu.
This will help prevent hard
disk or system problems.
3