Publicité
Les langues disponibles
Les langues disponibles
RADIO DATA SYSTEM
RADIO DATA SYSYEM service availability
varies with areas. Please understand if RADIO
DATA SYSYEM service is not available in you
area, the following service is not available.
RADIO DATA SYSYEM Basics
AF (Alternative Frequency): When the radio
signal strength is poor, enabling the AF
function will allow the unit to automatically
search another station with the same PI
(Program Identification) as the current station
but with stronger signal strength.
PS (Program Service name): The name of
station will be display instead of frequency.
AF Mode: Long press the [DISP] to enter
menu mode, then Press [
button to show AF mode, rotate the knob to
select AF ON or OFF.
AF on: AF function is activated.
AF off: AF function is disabled.
Remark: AF indicator on LCD will flash
until RADIO DATA SYSYEM information is
received. If RADIO DATA SYSYEM service
is not available in your area, turn off the AF
mode.
REG Mode: Long press the [DISP] to enter
menu mode, then Press [
button to show AF mode, rotate the knob to
select REG mode on and off.
REG on: AF function will implement the
regional code (of the PI) and only stations in
the current region can be tuned automatically.
REG off: AF function will ignore the regional
code(of the PI) and stations in the other
regions can also be tuned automatically.
CT Service ( Clock Time )
When receiving an RADIO DATA SYSYEM
s t a t i o n , t h e C T ( C l o c k T i m e ) s e r v i c e
automatically adjusts the time.
Traffic Announcements
Some RADIO DATA SYSYEM FM stations
periodically provide traffic information.
TP (Traffic Program Identification)
Broadcasting of traffic information.
TA (Traffic Announcements Identification)
Radio announcements on traffic conditions.
TA Mode: Press the [MENU] for more than
2 seconds to turn on/off the TA function.
When TA mode is turned on, the TA indicator
will blink. When traffic announcement is
received, the TA indicator will display. The
unit will temporarily switch to the tuner mode
(regardless of the current mode) and begin
broadcasting the announcement at TA volume
level. After the traffic announcement is over,
it will return to the previous mode and volume
level. When TA is turned on, SEEK, SCAN,
AMS function can only be received or saved
when traffic program identification (TP) code
is received.
PTY Reception ( Program Type )
] or [
]
RADIO DATA SYSYEM FM stations provide a
program type identification signal.
Example: news, rock, info, sport, etc.
PTY Type Preset
Press the [MENU] to enter PTY mode. Rotate
the knob to select the desired program type.
Then press the knob to confirm.
] or [
]
63
Publicité
