Tips for saving energy
n
Install the appliance in a dry, well vent
ilated room, but not in direct sunlight
and not near a heat source (e.g. radi
ator, cooker, etc.). If required, use an
insulating plate.
Open and close the door as briefly
n
as possible.
Occasionally clean the rear of the ap
n
pliance with a vacuum cleaner or paint
brush to prevent an increased power
consumption.
The lowest energy consumption is
n
achieved when the appliance is oper
ated in the "multi-zone setting". The
declared energy consumption has
been measured in this thermostat set
ting. Other thermostat settings (e.g.
"single-zone setting") will result in in
creased energy consumption.
Operating noises
Normal noises
Humming - refrigerating unit is running.
Bubbling, gurgling or whirring noises -
refrigerant is flowing through the tubing.
Clicking - motor is switching on or off.
Preventing noises
The appliance is not level
Please align the appliance with a spirit
level. Use the height‐adjustable feet
or place something under the feet.
The appliance is not free‐standing
Please move the appliance away from
adjacent units or appliances.
Drawers or storage areas wobble
or stick
Please check the removable parts and,
if required, reinsert them.
Bottles or receptacles are touching
each other
Please move bottles or receptacles away
from each other.
en
25