Transportation And Storage - PACLITE Equipment VR800D Manuel De L'opérateur

8. If not, stop the engine, remove the nut and repeat procedures 5 to 7 until the neutral position is
properly set.
9. When the neutral position is correctly adjusted, apply Loctite to the Nut, which fix the Rod End,
and tighten it. Then, tighten the Lock Nut at the rod end.
VR Roller Oil Specification
Hydraulic oil Shell Tellus T37 or (MOBIL DTE15 or ESSO Unipower, XL46).
Engine
Use oil which is equivalent to or better than API Service categories CF, CD, or CE Grade oil. Use the
oil suitable for the ambient temperature as in the table below.
Season
Summer
Spring and Autumn/Fall
Winter

Transportation and Storage

Transportation on a vehicle
Make sure to lock the Handle and use proper slopes of sufficient width, length, and strength on
loading to and unloading from the vehicle.
The Operation Handle may move suddenly and irrationally during the loading
and unloading. Stand a safe distance away from the Operation Handle to avoid
sustaining any injury.
CAUTION
Apply the Parking Brake and tie the machine firmly to the vehicle during transportation.
Storage
•
For long-term storage, empty the fuel from the Fuel Tank by either sucking the remaining fuel out
from the Fuel Inlet Port or from the Fuel Filter after the filter cup has been removed.
•
Clean the Air Cleaner Element.
•
Clean-up the oil and dust accumulation on all rubber parts.
•
Clean the base plate and apply a light coating of oil to
prevent rust formation.
•
Cover the machine and store it in a dry place.
Temperature
Above 20ºC
From 5ºC to 20ºC
Below 5ºC
Vibratory Roller Manual (2009 version)
Grade
SAE 30
SAE 20
SAE 10 or SAE 10W-30
Stopper
11